sogou

      You are here: 手机版伟德客户端 > Service > Molding Process

      MOLDING PROCESS

      INJECTION 

      Plastic pellets are fed into the hopper. The Screw conveys and melts the pellets. The melted plastic is forced into the mold and the part is formed and cooled. The mold opens and the part is ejected.

      Molding Process

      INJECTION BLOW 

      The parison is clamped into a moldand air is blown into it. The air pressure then pushes the plastic out to match the mold. Once the plastic has cooled and hardened the mold opens up and the part is ejected.

      Molding Process

      INJECTION
      STRETCH BLOW  

      The Parison is heated or cooled specific locations to prepare for stretch blowing.The parison is clamped into a moldand air is blown into it. The air pressure then pushes the plastic out to match the mold. Once the plastic has cooled and hardened the mold opens up and the part is ejected.

      Molding Process

      EXTRUSION BLOW 

      Parison isheated and captured by closing it into a cooled metal mold. The air pressure then pushes the plastic out to match the mold. A trimmer cuts off the excess plastic on the top andbottom of the Bottle and is ejected from machine.

      Molding Process

      Copyright 2017 ZHEJIANG UKPACK PACKAGING CO,.LTD All Rights Reserved. Design By Gemelsoft.

      手机版伟德客户端

    • <kbd id="ldysz" ><rt id="ldysz" ><bdo id="ldysz" ></bdo></rt></kbd>
    • <source id="ldysz" ></source>

      <b id="ldysz" ></b>
    • <b id="ldysz" ><acronym id="ldysz" ><meter id="ldysz" ></meter></acronym></b>

          <del id="ldysz" ></del>
          ,